Sage 100 Printer Error Code 20, 30 and 41

This article will guide you through the process of resolving the many types of issues that are generated by the Sage 100 Printer Error Code 20, 30, and 41. I hope this article has been of use to you.

When printing to a paperless office from Sage 100, double-check that the Amyuni PDF drivers haven’t been manually updated by someone in the past. Sage 100 is currently using driver version 500, which is the most recent available. If Amyuni 550 was downloaded and installed by someone else, it is possible that this is the source of your error message.

Why Sage 100 Printer Getting an Issue

A problem that occurs from time to time with Sage 100 is that the ‘Deferred’ printer is the only choice available when choosing a printer for any report in Sage 100, regardless of the report type.

When you attempt to publish a Sage report or form and the Deferred printer seems to be the only printer accessible, you must first authenticate with the network before printing. To put it another way, you must get access to the network disc wherein Sage is installed in order for Sage to recognize you! Occasionally, just logging out and back on can address the issue.

In Paperless Office, one of the difficulties that might arise is that the program stops responding while printing, with the following errors appearing:

Error code 30: printer not activated

Error code 41: printer not activated

Error code 20: printer not activated

This issue might be caused by the Sage PDF Converter or any of the components connected with it, such as the Printers Objects itself (in Windows), the Registry Entries components, and the .dll files that manage the Sage PDF Converter. In order to generate the Sage PDF Converter and the appropriate .dll files on the workstation, we propose that users reinstall Workstation Setup from scratch.

What are the Ways to Fix Sage 100 Printer Error 30

You may use any of the ways given below to fix the Sage 100 printer not activated error code 30 On Windows 10 Errors that you are experiencing. The following are the resolutions in a step-by-step format: 

Ways I: It is Necessary to Reinstall the Sage 100 PDF Converter

It is possible that the PDA converters may cause issues. When the Sage 100 printer error code 30 may be rectified by reinstalling the PDF conversion Sage 100 from the Paperless Office Options window. Let’s take a look at the list below to have the reinstallation process started.

• Start the “Sage” software in your capacity as an administrator.
• Select “File” from the drop-down menu by tapping twice.
• Now, choose “Run” from the drop-down menu.
• Choose “PL AdvanceOptions UI” from the drop-down menu.
• Then hit the “OK” button to confirm your selection.
• Now, hit the “OK” button on your keyboard once again.
• Choose the default date from the drop-down menu.
• After that, choose “Install Converter” from the drop-down menu.

• When you click?️ OK, the “Paperless Office Advanced Options” box will be closed and you will be returned to the previous screen.
• After you’ve finished with these steps, you may try printing your documents.
• And if you’re still experiencing difficulties, we have more options.

Ways II: Install the most Up-to-date Printer Drivers available

It is possible that corrupted or out-of-date printing drivers are to blame for the Sage 100 printer not enabling problem code 30. Check for and install any new driver updates that may be available to address this problem. The following steps may be conducted in order to achieve this goal.

• Navigate to the “Devices and Printers” option on your Windows operating system.
• Then pick “Sage PDF Converter” from the drop-down menu.
• After that, choose “Printer” from the drop-down selection that appears.
• From the drop-down box, choose “Properties.”
• Using the drop-down menu, choose “Advanced.”
• Choose “Amyuni Document Converter” from the drop-down option that appears.
• Choose “Check for Updates” from the resulting drop-down menu.
• Allow your Windows system to look for new PDF converter updates while you continue working.
• If such an update is released, be sure to install it on your computer as soon as possible.
• Following a successful update of the Sage PDF Converter, you may print the document to determine whether or not the issue has been resolved successfully.

Ways III: Permissions for the Windows Registry may be configured

It is possible that incorrect permissions in the Windows Registry may prohibit you from doing certain actions in the Sage 100 software. The permissions in the Windows registry may be changed to overcome difficulties with the Sage printer on a Windows PC. Follow the steps outlined below:

• In Windows, choose the “Start” option from the menu bar.
• From the drop-down menu, choose “Run.”
• Now, choose the “Regedit” option from the drop-down menu.
• Now, see for the “HKEY CURRENT CONFIG Software” key in the registry.
• Right-click on the “Software” key to bring up the context menu.
• Select Properties from the drop-down menu.
• “Permissions” will be shown in the drop-down menu.
• Make your selection from the drop-down menu, “Full Control for Users.”
• Then, to submit your application, click the “Apply” button.

Ways IV: Verify the DLL Files for Errors

• In the event that you encounter the Sage 100 printer not enabled problem code 30 on Windows 10, make certain that the valid DLL files are correctly installed on both the workstation and the server. 
• Verification should be performed on the DLL files listed below:
• The CDINTF.dll file?️ must be located in the “..MAS90Home” directory on your server. 
• Ideally, the CDINTF300.dll file should be located in the “C: WindowsSystem32” directory on the workstations’ hard drives.
• Note that CDINTF300.DLL file is a repetition of the CDINTF.dll file, so please keep this in mind when using it.
• In this case, the desktop machine is made reference to as number 300.
• There are 3436 KB of space for 32-bit data and 3744 KB of space for 64-bit data.

Ways V: Restore the operating system of Windows

Windows operating systems may be tough to work within certain instances. After applying the best available options, it is recommended that you restore your system if you are still experiencing problems with error code 30 in the Sage 100 application. The following are the actions to take in order to manually restore the system:

• Restarting your Windows computer is the first step.
• After restarting the computer, you will be able to access the “System Tools” menu item.
• Select “System Restore” from the drop-down option now.
• When you discover a fresh screen on your computer.
• Choose the “Restore My System to a Previous State” option from the drop-down menu.
• Go to the next tab, where you’ll need to double-check the restoration point that was set up before.
• You may now choose which restoration points to restore depending on your requirements.
• Once you have chosen your selection, go to the next step by pressing the “Next.”
• In the confirmation box, you may check that the action you just performed was correct.
• To proceed, click on the “next” button.

---

What are the Ways to Fix Sage 100 Printer Error 41

Operating systems come with a wide range of capabilities that let users do various jobs on their PC. Every time a system file or a Windows disc is corrupted or edited in an incorrect manner You may begin to have difficulties while attempting to run some apps, and you will see error messages as a result. One of the issue messages that window users get while attempting to operate their printers, such as printer not enabled error code 41, will be discussed today. The Sage 100 printer not enabled error code 41 is produced by hardware that has been deleted after the driver has been loaded, or by a problem with the device driver that has been installed.

Ways I: Errors within the OS will create a “Printer not active, error code 41” issue on your PC

The issues might also be with the system files connected to the printer drivers or registry entries involved with the operation of the printer. This file system checker will assist you in order to verify the integrity of the file system on the operating system. SFC will scan all system files and fix them automatically. Here is how to conduct the SFC scan:

• Access the run command, you could do that by trying to type ‘cmd’, click on it but the command line will open?.
• Form ‘ sfc /scannow” and press enter.
• This will search for any issues that are creating difficulties for your Pc and correct them automatically.
• This will take a little time first before it can conclude, wait till it’s 100 percent done.
• Restart your Computer and try utilizing your printer again.

Ways II: Check Printer Configuration

Incorrect setup of printer settings may potentially cause “Printer not active, error code 41”. This drawback is known to come back up if the selected printer isn’t established as the default printer to hold out all the print-related chores. Users who see the “Printer not activated, error code 41” pop-up notice should verify their printer settings and restart the printer spooler service, which is running in the background of the system.

• Right-click or press and hold the Start button at the bottom left of the screen.
• Then choose Run from the menu that appears. 
• Browse down the list of applications.
• Choose Print Spooler by clicking or tapping on it.
• In the upper-left corner of the window, Restart the service by clicking or tapping on it.
• Windows will try to restart this service.
• When the Print Spooler status is Running, it signifies that the Print Spooler service is up and running, and it should look like this:
• Retry using your printer.

Ways III: Install Printer Drivers Again

Printer driver damage or corruption might also result in “Printer not enabled, error code 41.” Users who are encountering this problem should reinstall their printer drivers. This eliminates all issues and restores printer operation. This might be accomplished by following the methods outlined below…

We recommend that you delete the printer’s drivers and then reinstall them manually from the manufacturer’s website.

• Now, Restart the computer and log in as “Administrator.”
• Go to the start menu and start typing MMC; the Microsoft Management Center shortcut will display; click on it.
• Select Add/Remove Snap-in from the file menu.
• Then, scroll down the list and choose the “Print Management” snap-in before clicking “Add.”
• Select Print Management by double-clicking it.
• Extend the Custom Filters subtree.
• From the left navigation pane, choose All Drivers.
• Right-click on the printer driver on the right-hand side and choose Delete.
• Before installing new or alternative print drivers, be sure to restart your computer.
• Reinstall the Printer Software and verify that it works.

---

What are the Ways to Fix Sage 100 Printer Error 20

Your failure to print invoices might be due to broken or destroyed customized forms.

Ways I: Customized Forms Settings Should be Updated

As a consequence, you should take the actions outlined below to set Sage Email Writer as the default printer.

• To begin, choose Standard Report or Standard Form to email and print the balance sheet.
• Set Sage Email Writer as your default printer.
• You may now quit the Sage app once you’ve configured your default printer.
• Then, go to the Start Screen.
• From this menu, you may choose Devices and Printers.
• Finally, ensure that Sage Email Writer is not configured as the default printer.

Ways II: Correction of Amyuni Document Converter Errors

You may be able to print invoices if you’re using the Amyuni Document Converter 550 driver. Amyuni Document Converter issues, on the other hand, might be caused by a defective printer.

• First, close any Sage 50 programs that are already operating on your computer.
• Click to the Control Center now.
• Then navigate to the Devices and Printers section.
• Then, from the drop-down option, pick Sage 50 E-mail Writer.
• Now choose “Printer Properties.”
• You must pick the Advanced option at this stage.
• The Amyuni Documents Converter 550 drivers software will then be selected.
• Finally, after you’re finished, click “ Ok ”.

Ways III: As an administrator, use Sage 50 software

When running Sage 50 as an administrator, follow the instructions outlined below.

• First, ensure your computer has no active windows or tabs.
• Then, on your desktop, search for the Sage 50 software icon.
• Finally, right-click the program icon and choose Run as Administrator.

---

Installation and Configuration of PDF Converter in Sage 100

Below are the ways to install and configure Sage PDF Converter:

• Enter “Sage PDF Converter” as the name.
• Enter “Sage 100 PDF Converter” as the name.
• Choose Printer Properties.
• Now, Select Ports.
• Add a Local Port and name it Sage.
• Navigate to the Advanced tab.
• Make certain that Print straight to the printer is chosen.
• If appropriate, click the Security tab and give full privileges to the username and everyone groups.

We hope that if you read the previous article on Sage 100 Printer Error, you found the information you were looking for. If you don’t understand anything, just keep reading until you do. If you have any questions or run into any problems while following the instructions, please call +1800-986-6931 the hotline as soon as possible for assistance.

We welcome you to contact such a member of the team for Sage 100 assistance in overcoming any obstacles or challenges that you may be encountering. If you have any questions, please do not hesitate to contact us.

FAQ’s